B2B Internet for Chemical products

Dioctyl DOA and dioctyl DOP are commonly used plastic softeners, which are widely used in the plastic and rubber industries. Although they have similar chemical structures and properties, they have some differences in certain aspects

The chemical structures of dioctyl DOA and DOP are slightly different. DOA refers to dioctylamide with chemical formula C22H42O4, while DOP refers to dioctylate with chemical formula C24H38O4. Due to their different chemical structures, dioctyl DOA and DOP may exhibit different properties in certain applications

The melting points of dioctyl DOA and DOP are also different. The melting point of DOA is between 68 ℃ and 6 ℃, while the melting point of DOP is between 50 ℃ and 10 ℃. This means that DOA and DOP may have different plasticizing effects at different temperatures. Therefore, when selecting additives, it is necessary to determine which type of additive to use based on specific process conditions and requirements

Furthermore, the solubility of DOA and DOP is not exactly the same. DOA has a lower solubility in water, while DOP has a higher solubility in water. This also reflects their differences in different applications. According to the needs, suitable additives can be selected to meet specific process requirements

In addition, there is also a certain price difference between DOA and DOP. Generally speaking, the price of DOA is relatively low, while the price of DOP is relatively high. When choosing additives, cost is also one of the factors to consider

In summary, dioctyl DOA and DOP are commonly used plastic softeners, and they have some minor differences in chemical structure, melting point, solubility, and price. When selecting suitable additives, it is necessary to consider specific process conditions, requirements, and costs to ensure the best plasticizing effect. I hope this article is helpful for you to understand the difference between dioctyl DOA and DOP.