B2B Internet for Chemical products

L-75 is an important raw material for chemical production, widely used in fields such as medicine, pesticides, dyes, etc. This article will introduce the manufacturing method of L-75, including raw material preparation, reaction steps, post-treatment, and other aspects

1、 Raw material preparation 

To manufacture L-75, the following raw materials need to be prepared: phenol, acetone, sodium hydroxide, hydrochloric acid, etc. Among them, phenol and acetone are the main raw materials, while sodium hydroxide and hydrochloric acid are used to regulate the pH value of the reaction system

2、 Reaction steps 

1 The condensation reaction of phenol and acetone 

Add phenol and acetone in a certain molar ratio to the reaction vessel, heat up to a certain temperature, add catalyst, and carry out the condensation reaction. The product of the reaction is bisphenol A

2. Reaction between Bisphenol A and Sodium Hydroxide 

Add Bisphenol A and Sodium Hydroxide in a certain molar ratio to the reaction vessel, heat up to a certain temperature, and proceed with the reaction. The product of the reaction is sodium bisphenol A

3. Reaction of bisphenol A sodium salt and hydrochloric acid 

Add bisphenol A sodium salt and hydrochloric acid into the reaction kettle according to a certain molar ratio, adjust the pH value to a certain range, and conduct the reaction. The reaction product is L-75

3、 After the post-treatment 

reaction is completed, cooling, crystallization, filtration, washing, drying and other steps are carried out to obtain pure L-75 product

4、 Notes 

1 During the reaction process, it is necessary to strictly control the reaction temperature and pH value to ensure the smooth progress of the reaction and the quality of the product

During the post-processing, attention should be paid to the conditions of crystallization and drying to avoid product decomposition and deterioration

In summary, the manufacturing method of L-75 requires multiple steps and strict control of reaction and post-treatment conditions to ensure product quality and yield. At the same time, it is necessary to pay attention to safety production and environmental requirements to ensure the safety and sustainability of the production process.