Manufacturing Method of Calcium Chloride Dihydrate Balls
In the field of raw materials for chemical production, calcium chloride dihydrate balls are a common product with a wide range of uses. This article will introduce the manufacturing method of calcium chloride dihydrate ball, including the steps of raw material preparation, mixing, molding, drying and packaging.
I. Raw material preparation
The main raw materials for manufacturing calcium chloride dihydrate ball are calcium chloride and water. Calcium chloride should be white, unadulterated powder or granular material, purity should be higher than 95%. The water should be pure water, without impurities and odor.
Two, mixing
Mix calcium chloride and water together according to a certain proportion and stir well. The mixing ratio can be adjusted according to the requirements of the product, usually the mass ratio of calcium chloride and water is 1:2. During the mixing process, you can use the paddle or mixer to stir to ensure that the raw materials are fully mixed. Third, molding
The mixed materials are put into the molding machine for molding. The molding machine can adjust the size and shape of the ball according to the requirements of the product, generally made into a ball with a diameter of 1-3cm. The molding process needs to pay attention to maintain the consistency and uniformity of the material to ensure product quality.
Four, drying
After molding, calcium chloride dihydrate balls need to be dried to remove excess moisture. Drying temperature should be controlled at 60-80 ℃, drying time according to the size of the ball and humidity, generally need 2-4 hours. During the drying process, you need to pay attention to turning the ball to avoid the ball sticking.
V. Packaging
After drying, the calcium chloride dihydrate ball needs to be packaged to avoid moisture and pollution of the product. Packaging materials should be selected moisture-proof, corrosion-resistant materials, such as plastic bags or paper bags. Care needs to be taken to maintain the integrity and cleanliness of the product during the packaging process.
In conclusion, the manufacturing method of calcium chloride dihydrate ball needs to pay attention to the operational details of the steps of raw material preparation, mixing, molding, drying and packaging to ensure product quality and production efficiency. Meanwhile, the production process needs to strictly comply with relevant safety regulations and environmental protection requirements to ensure the safety and sustainability of the production process.
The above is a general introduction to the manufacturing method of calcium chloride dihydrate balls, and the specific production process needs to be adjusted and optimized according to the actual situation. I hope this article can provide some reference and help to the staff in the relevant fields.
