Manufacturing method of ethylene tar-driving material
Ethylene tar is an important raw material for the production of chemicals, which is widely used in the fields of rubber, plastics, coatings, medicine and so on. And driving material is a key intermediate in the production process of ethylene tar. This paper will introduce the manufacturing method of ethylene tar-driving material. I. Preparation of raw materials
The following raw materials are needed to manufacture ethylene tar-driving material: ethylene tar, catalyst, additives and so on. Among them, the quality of ethylene tar has a great influence on the quality of the final product, so it is necessary to choose a supplier with stable quality.
2. Reactor operation
1. Add the raw materials such as ethylene tar, catalyst and additives into the reactor according to a certain proportion.
2. Turn on the stirring device of the reaction kettle, so that the raw materials are fully mixed.
3. Control the reaction temperature and time, so that the materials in the reactor are fully reacted.
3. Separation and purification
After the reaction is finished, it is necessary to separate and purify the materials in the reaction kettle in order to obtain ethylene tar-driving material with high purity. The specific steps are as follows:
1. Pour the materials in the reactor into the separation equipment for preliminary separation.
2. Further purify the material after preliminary separation to obtain higher purity ethylene tar-driving material. After the manufacturing is completed, the quality of the ethylene tar-driving material needs to be inspected to ensure that the product meets the relevant standards and requirements. The items of quality inspection include purity, acidity, color, moisture and so on.
V. Packaging and storage
After passing the quality inspection, it is necessary to package and store the ethylene tar - driving material. Packaging should use containers with good sealing to avoid contamination or quality change of the product. It should be stored in a cool, dry and ventilated place, avoiding direct sunlight and high temperature.
In conclusion, the manufacturing method of ethylene tar-driving compound needs to go through many stages such as raw material preparation, reactor operation, separation and purification, quality inspection and packaging and storage. In order to ensure the quality and stability of the product, it is necessary to strictly control the process parameters and operation process of each link. At the same time, it is also necessary to strengthen the maintenance and repair of the production equipment to ensure the normal operation and service life of the equipment.
In the actual production process, it is also necessary to pay attention to the following points:
1. Strictly abide by the production safety regulations to ensure the safety of the production process.
2. Strengthen the monitoring and management of the production process, and discover and solve the problems arising in the production in time.
3. Continuously optimize the production process and operation procedure to improve production efficiency and product quality.
4. Strengthen communication and collaboration with suppliers and customers to ensure a smooth supply chain and product sales channels.
In short, the manufacturing method of ethylene tar-driving compounds requires comprehensive consideration of several aspects, including raw material quality, process parameters, equipment maintenance, safe production and other aspects. Only by strictly controlling the operation process and process parameters of each link can we ensure the quality and stability of the product and improve the economic and social benefits of the enterprise.
