Manufacturing method of industrial cracked carbon penta-carbon-driving material
I. INTRODUCTION
In the field of raw materials for chemical production, industrial cracked carbon penta-carbon-driving material is a kind of important raw material, which is widely used in the fields of rubber, plastics, coatings and so on. In this paper, we will introduce a method of manufacturing industrial cracked carbon 5-opener material, which has the advantages of easy to obtain raw materials, simple operation, stable product quality and so on.
II. Raw materials and equipment
1. Raw materials: naphtha, steam, catalyst.
2. Equipment: cracking furnace, fractionating tower, condenser, storage tank, etc.
3. Manufacturing method
1. Raw material pretreatment: desulfurization and dehydration of naphtha to ensure the quality of raw material.
2. Cracking reaction: mix the pretreated naphtha with steam, enter into the cracking furnace, and carry out cracking reaction under the action of catalyst to produce cracked carbon 5-driving material.
3. Fractionation: The product of the cracking reaction is fractionated to separate the Cracked Carbon Penta-opener feed.
4. Condensation and storage: Condense the fractionated Cracked Carbon Penta-opener material, and then store it in the storage tank.
4. Precautions
1. Strictly control the quality of raw materials to ensure stable product quality.
2. The operating temperature, pressure and other parameters of the cracking furnace need to be adjusted according to the equipment and product requirements.
3. Appropriate tower pressure and reflux ratio need to be maintained in the process of fractionation to ensure product quality.
4. The storage process needs to pay attention to sealing and sun protection to avoid product quality degradation.
V. Conclusion
Through the above manufacturing method, the industrial cracked carbon 5-driving material with stable quality can be produced, which can provide a reliable raw material guarantee for the production of chemicals. Meanwhile, the method has the advantages of easy to obtain raw materials, simple operation and stable product quality, which is of good value for popularization and application.
