Sales of Chinese chemical raw material manufacturers- chemwin chemical network

+86 19117288062

E-mail :

via more contact

1-Propanol

1-Propanol is used in making n-propyl acetate; and as a solvent for waxes, resins, vegetable oils, and flexographic printing ink. It is produced from the fermentation and spoilage of vegetable matter. A colorless liquid made by oxidation of aliphatic hydrocarbons that is used as a solvent and chemical intermediate.

Request For Quote

+86 19117288062

E-mail :

via more contact

Soda Ash

The most prominent characteristic of soda ash in solution is the high buffered pH response. For example, changing the sodium carbonate dosage from 0.03% to 30% only causes the solution pH to change from 10.5 to 11.7. Because of this, in mineral processing application, soda ash is used for pH control to a maximum value of 10.5.

Request For Quote

+86 19117288062

E-mail :

via more contact

Dimethylformamide (DMF)

N,N-Dimethylformamide (DMF) is a clear liquid that has been widely used in industries as a solvent, an additive, or an intermediate because of its extensive miscibility with water and most common organic solvents. Dimethylformamide is primarily used as an industrial solvent. Dimethylformamide solutions are used toprocess polymer fibers, films, and surface coatings; to permit easy spinning of acrylic fibers; to produce wire enamels, and as a crystallization medium in the pharmaceutical industry. DMF can also be used for formylation with alkyllithium or Grignard reagents. It is used as a reagent in Bouveault aldehyde synthesis and also in Vilsmeier-Haack reaction. It acts as a catalyst in the synthesis of acyl chlorides. It is used for separating and refining crude from olefin gas. DMF along with methylene chloride acts as a remover of varnish or lacquers. It is also used in the manufacture of adhesives, fibers and films. N,N-Dimethylformamide (DMF) is a solvent with a low evaporation rate, useful for preparing solutions with a variety of hydrophobic organic compounds used in molecular biology applications. N,N-Dimethylformamide was used to solubilize MTT crystals in cell viability assays.It was also used in feruloyl esterase activity assay in molds exhibiting high activity of the enzyme. The world-wide consumption of DMF in 2001 was approximately 285, 000 metric tonnes and most of that was used as an industrial solvent.

Request For Quote

+86 19117288062

E-mail :

via more contact

Pure Terephthalic Acid

Terephthalic acid (TPA) is a high-tonnage chemical, widely used in the production of synthetic materials, notably polyester fibers (poly-(ethylene terephthalate)). Terephthalic acid is a benzenepolycarboxylic acid with potential anti-hemorrhagic properties. 1,4-benzenedicarboxylic acid is mainly used for the production of poly (ethylene terephthalate). Also production of plasticizer dioctyl phthalate (DOTP) and polyester plasticized agents. 1,4-benzenedicarboxylic acid and polyhydric alcohols have a condensation reaction withd iethylene glycol, triethylene glycol, glycerol, propylene glycol, butylene glycol, etc. preparation of the polyester plasticizer.

Request For Quote

+86 19117288062

E-mail :

via more contact

Caustic Soda

Caustic soda is one of the most widely usedchemicals. It is used to neutralize acids; tomake sodium salts; to precipitate metals astheir hydroxides; in petroleum refining; in thesaponification of esters; in the treatment ofcellulose, plastics, and rubber; and in numeroussynthetic and analytical applications. Sodium hydroxide is sold commercially as anhydrous flakes or pellets or as 50% or 73% aqueous solutions. It has countless industrial uses and is one of the top 10 chemical in terms of production and use on a global scale. Approximately 15 million tons of sodium hydroxide is used annually. Its largest use, consuming about half of its production, is as a base in producing other chemicals. It is used to control pH and neutralize acids in chemical processes. The paper industry makes extensive use of sodium hydoxide in the pulping process. Sodium hydroxide is used to separate fibers by dissolving the connecting lignin. It is used in a similar fashion in the production of rayon from cellulose. Sodium hydroxide is a key chemical in the soap industry.In the saponification process, triglycerides obtained from animal and plants are heated in abasic solution to give glycerol and soap: Sodium hydroxide is used in the textile industry for bleaching and treating textiles to makethem dye more readily. The petroleum industry uses sodium hydroxide in drilling muds and asa bactericide. Sodium hypochlorite (NaOCl) is used extensively for cleaning and as a disinfectant.Common household bleach consists of about 5% sodium hypochlorite solution. Sodiumhypochlorite is prepared by reacting chlorine with sodium hydroxide: Cl2(g) + 2NaOH(aq) →NaOCl(aq) + NaCl(aq) + H2O(l). Sodium hydroxide is used in the food industry for cleaningand peeling fruits and vegetables. Sodium hydroxide is a minor ingredient in many commonhousehold products, but in a few it may constitute more than half of the product. Dranocrystals contain between 30% and 60% sodium hydroxide and some drain cleaners can consistof 100% sodium hydroxide.

Request For Quote

+86 19117288062

E-mail :

via more contact

Tetrahydrofuran (THF)

Tetrahydrofuran is used as a solvent forresins, vinyls, and high polymers; as a Grignardreaction medium for organometallic,and metal hydride reactions; and in the synthesisof succinic acid and butyrolactone. Tetrahydrofuran is used primarily (80%) to make polytetramethylene ether glycol, the base polymer used primarily in the manufacture of elastomeric fibers (e.g., spandex) as well as polyurethane and polyester elastomers (e.g., artificial leather, skateboard wheels). The remainder (20%) is used in solvent applications (e.g., pipe cements, adhesives, printing inks, and magnetic tape) and as a reaction solvent in chemical and pharmaceutical syntheses.

Request For Quote

+86 19117288062

E-mail :

via more contact

Polymeric MDI

These rigid polyurethane foams are good thermal insulators and used in nearly all freezers and refrigerators worldwide, as well as buildings. Typical polyols used are polyethylene adipate (a polyester) and poly(tetramethylene ether) glycol (a polyether).

Request For Quote

+86 19117288062

E-mail :

via more contact

Isobutanol

Isobutanol Application: (1) For analysis reagents, chromatography reagents, solvents and extraction agent. (2) As raw materials for the organic synthesis, and also act as a superior solvent. (3) Isobutanol is raw materials for organic synthesis. It mainly used in the synthesis of isobutyronitrile, an intermediate for diazinon. (4) As raw materials of organic synthesis, isobutanol is used in the manufacture of petroleum additives, antioxidants, 2, 6-butylated hydroxytoluene, isobutyl acetate (paint solvents), plasticizers, synthetic rubber, artificial musk, fruit oil and synthetic drugs. It can also be used to purify strontium, barium and lithium salts and other chemical reagents and used as a superior solvent. (5) Extraction solvent. Food flavors listed in GB 2760-96.